Step 02 :- Open the DarkComet RAR (You need WinRAR) It should look like this:
Step 07 :- At the bottom left, it will show up a Help Screen, tick ‘Do not show at startup‘ then click ‘Fine‘
A new window should open, put in your Port then tick ‘Try to forward automaticaly (UPNP)
IN this case, I will do port 70 so I put that in, tick ‘Try to forward automatically (UpNP) and click Listen.
Step 10 :- Move over to ‘Socket / Net‘ located at the very end of the top left border
You should see something like this:
70 may not be your port, your port that you added in ‘Listen to new port‘ will be displayed, not specifically 70.
Step 11 :- Now, click DarkComet-RAT again and click Server Module, then click Full Editor (Expert)
Step 12 :- Name your Security Password anything you like, then click the Mutex a few times. We then have the Main Settings done.
Step 13 :- Go to Network Settings.
Now, go to no-ip.com and register Click Free DNS
Step 15 :- Now, at the Body you will see a list of options, click ‘Add Host’
Step 17 :- Click Create Host.
Step 18 :- Go back to your DarkComet and put in the Ip/DNS and Port (DNS for the NO-IP you made a second ago and Port for the one you listened on!)
Tick the ‘Start the stub with windows (module startup)’
Then leave everything but ‘Persistance installation ( always come back )‘
Tick that.
Now, it should look like this:
If you are going to get it crypted then don’t tick UPX (Ultimate Packer Executable) but if you are, I would leave it off and just have it on No compression.
Step 21 :- Now tick the ‘Save the profile when stub succesfully generated’ and Build the Stub. Now there is one last thing.
Step 22 :- Go to the Client Settings in DarkComet-RAT and then Click NO-IP Updater
Step 23 :- Then put in the NO-IP host, Username and Password, then tick ‘Auto update your no-ip dns when your IP change‘
Step 24 :- Now, run the stub that you generated in a Sandbox to test, and you should show up!
For More :- Techgator The Techs Bot
Here now, we have run through the entire thorough setup for DarkComet. Even your kid brother could follow this tutorial. Now what you need to do is some research into how to encrypt the EXE, so it can be installed remotely without an antivirus putting up a fuss. I know Metasploit has some pretty good encryption in it’s framework. I would start there. Watch out for others telling you they will encrypt it for you. This is usually a trick to just pack their own RAT into your stuff!